-
Make sure a complete cleaning of the fluid circuit has been performed (Cleaning after treatment).
-
Check that the optical surfaces of the vision boxes are perfectly clean.
-
Check the nozzles as described in the following chapter (Nozzle check).
-
Turn off the machine by pressing the green button on the ON/OFF control box.
-
Store the sprayer in a covered place protected from the weather.
-
If there is a risk of freezing, follow the guidelines in the following chapter (Preparing the sprayer for storage).
-
Do not use a pressure jet directly on the vision boxes.
INFORMATION
If the machine needs to be turned on again directly after it has been shut down, you must wait for the loss of the Wi-Fi signal on the tablet before turning it back on. This process takes a few seconds.