INFORMATION
Do not operate the valves when the pump is running.
-
Before handling the valves, the pump must be switched off by turning off the ON/OFF control box. The green light on the ON/OFF button must be off.
-
Set the valves in Spraying position mode.
INFORMATION
Do not use this 3D illustration as reference. Refer to the position modes table.
-
In the tractor, set the power take-off (PTO) speed to 540 rpm.
INFORMATION
Do not use the economy mode (750 tr/ min).
-
Check the rotation direction of the PTO.
-
Engage the PTO.
-
Turn on the sprayer system by pressing the green ON/OFF button on the cab HMI.
-
Check after a few minutes that the system has started. The green light of the ON/OFF control box must be on.
-
If the batteries are empty: press the red button on the ON/OFF control box for 1 second to send an excitation signal to the alternator, to restart it.