WARNING
Never work under the machine unless it is securely supported with appropriate workshop stands. Failure to do so may result in serious injury or death.
The machine can be placed in maintenance position to allow safe access to components located underneath the machine. This procedure consists of lifting the machine and securing it using workshop stands before performing any maintenance work.
-
Park the sprayer on a flat and stable surface. Engage the tractor parking brake.
-
Lift the sprayer using the tractor’s hydraulic system until the required clearance is reached.
-
Place appropriate workshop stands under the designated support points of the sprayer.
-
Slowly lower the sprayer until its weight is fully supported by the workshop stands.
-
Stop the tractor engine and remove the ignition key.
-
Verify that the sprayer is stable and securely supported before starting any maintenance work underneath.
WARNING
Never rely solely on the tractor hydraulic system to support the sprayer. Always use appropriate workshop stands.