INFORMATION
The preparation of a spray mixture requires agitation to obtain a homogeneous mixture. Depending on the volume of spray mixture, activate only the submerged agitator nozzles to avoid excessive foaming.
-
Ensure that the valves are in Mixture Prep: 2. Full Mixture Agitation position mode.
INFORMATION
Refer to the blue position modes table.
-
Set the AGITATION valve to LOW (if the mixture volume does not exceed 50 L | 13.2 US gal).
-
Start the pump and let it agitate for 3 minutes.
-
Set the AGITATION valve to HIGH + LOW and let it agitate for 7 minutes (if the mixture volume does exceed 50 L | 13.2 US gal).
-
Turn off the pump.
