Tank system
|
Water tank volume |
140 L 37 US gal |
|
Mixture tank volume |
140 L 37 US gal |
|
Induction hopper volume |
20 L 5.3 US gal |
|
Overpressure limit |
8 bar 116 psi |
|
Pressure in the booms
|
3 bar 43.5 psi |
|
Broadcast flow rate at 7 km/h |
400 L/ha 105.6 US gal/ac |
|
Typical work rate |
Up to 1.6 ha/h Up to 4 acres/h |
Filters
|
Water tank filter basket |
18 mesh |
|
Mixture tank filter basket |
18 mesh |
|
Suction filter |
80 mesh |
|
Section filter |
100 mesh |
Spray booms
|
Number of boom |
2 booms |
|
Effective number of nozzles |
108 nozzles |
|
Total spray width |
2.22 m 7.3 ft |
|
Flow of all booms in full |
21.6 L/min 5.7 US gpm |
Nozzles
|
Single nozzle broadcast flow rate at 3 bar |
0.2 l/min 6.76 fl oz/min |
|
Spray angle (As) |
25° |
|
Spray geometry |
Flat triangle |
|
Orifice diameter (Do) |
0.46 mm |
Brand and type of nozzles: Euspray type IC1X502E
Residual volume
The total residual volume is defined in ISO 13440:1996 §2.1. It is the sum of the volume of the residue in the tank (dilutable volume) and the dead volume (non-dilutable volume). The maximum allowable value of this volume is defined in ISO 16119-2:2013 §5.1.1.3.1. The boom width taken into account is the total width used for spreading by cumulating the overlaps. This width is X m | X ft and is therefore wider than the projected with of X m | X ft.
|
Mixture tank volume (Vb) |
140 L 37 US gal |
|
Total spraying width (Lb) |
2.22 m 7.3 ft |
|
Volume of total allowable residue (Vr = 0.5 % Vb + 2 Lb) |
5.14 L 1.4 US gal |
Mechanical values
|
Forward speed |
2.0 m/s 6.56 ft/s |
|
Minimum forward speed |
0.6 m/s 2.13 ft/s |
|
Maximum water mass
|
155 kg 341.7 lbs |
|
Maximum spray mixture mass |
140 kg 308.6 lbs |
|
Sprayer mass (empty tanks) |
760 kg 1 675 lbs |
|
Sprayer mass (full tanks) |
1055 kg 2 326 lbs |
Tractor configuration requirements
|
Hitch |
The machine is suitable for tractors equipped with a standardized category 1 three-point hitch |
|
Rear lifting capacity at 610 mm from the hitch |
1100 kg 2425 lbs |
|
Minium distance from the end of the PTO to the center of the lower hitch point (with the lower link horizontal) (Lmin) |
0.5 m 1.6 ft |
|
PTO power |
2.5 kW 3.35 hp |
|
PTO rotation frequency |
540 rpm |